Protective Packaging Corporation is one of the leading manufacturers of static shielding bags in the United States. Although we carry “ready-made” bags, our manufacturing facility gives us the ability to create customized static shielding bags of any size, from a 2 inch square to over 200 feet long.
Below are the static shielding and ESD materials we carry. We have 3 materials certified to MIL-PRF-81705 requirements including the ONLY material on the market that certified to MIL-PRF-81705 Type III.
|ESD STATIC SHIELDING & MIL-PRF-81705|
|Protect 2194||Fr 2194||MIL-PRF-81705 Type I|
|Protect ESD||Cadpak ESD||MIL-PRF-81705 Type I|
|Protect STAT 100M||Static Shielding||MIL-PRF-81705 Type III|
|Protect SS||Static Shielding||Static Shielding|
We Make Bags of All Sizes!
|4″ x 6″||Open-Ended||Materials In Stock|
|5″ x 5″||Open-Ended||Materials In Stock|
|8″ x 8″||Open-Ended||Materials In Stock|
|8″ x 10″||Open-Ended||Materials In Stock|
|10″ x 10″||Open-Ended||Materials In Stock|
|10″ x 12″||Open-Ended||Materials In Stock|
|14″ x 16″||Open-Ended||Materials In Stock|
|20″ x 20″||Open-Ended||Materials In Stock|
|UNLIMITED – any size you need||Open-Ended||Materials In Stock|
If the size you need is not listed above, DON’T PANIC! Just call us at 1-800-644-4032 and tell us what you need and we will make it.
All of our bags are made with metal-in static shielding materials which offer superior durability at a low cost. Enhanced durability is obtained with the metalized layer buried between the polyester and the polyethylene layers of the metal-in shielding. The metal-in layer prevents the penetration of damaging electrostatic fields. Tribocharging is minimized by specially processed, non-static-generating polyethylene. This type of bag is recommended when packaging static sensitive components.