|
|
|
|
- ISO 9001:2000
- Quality Certified
- Small Business
- Veteran-Owned
- Certified Boeing
Preferred Supplier
|
|
|
Electrostatic Discharge Packaging
Protective Packaging Corporation is the
largest manufacturer of static shielding bags and esd shielding products in the Southwest
United States. Additionally, since we are a manufacturer,
we can produce an ESD
(Electrostatic Discharge) protective package to fit your specific
need. We also carry a wide variety of stock sizes in commercial
and military grade static shielding bags, readily available
for "Just-In-Time" delivery.
 Available constructions:
Static Shielding Bags-- Metal-In
|
 Metal-In
static shielding bags offer superior durability at a low cost.
Enhanced durability is obtained with the metallized layer buried between
the polyester and the polyethylene layers of the metal-in shielding. The metal-in layer prevents the
penetration of damaging electrostatic fields. Tribocharging is minimized
by specially processed, non-static-generating polyethylene. This type of
bag is recommended when packaging static sensitive components.
|
 |
Static Shielding Bags-- Metal-Out
|
|
Metal-Out static shielding bags are designed to protect against static-induced
damage. The Metal-Out layer is close to the surface for low surface
resistivity readings. The Metal Out static shielding bags will
dissipate a 5,000-volt static charge to zero in less than 100 microseconds.
|
ESD Moisture Barrier Bags
 |
|
This bag combines the properties of a Moisture Barrier Bag with EMI-RFI as well as ESD shielding. The
MVTR (moisture vapor transmission rate) also meets the requirements of Mil-PRF-131. The added aluminum foil
layer provides the EMI attenuation and water-vapor barrier properties.
|
Heavy Duty Tyvek Moisture Barrier Bags
 |
|
This bag has all of the properties of the ESD Moisture Barrier Bag as well as an outer layer of Tyvek
for very high tear resistance. This type of bag was designed to withstand the harshest vacuum packaging
applications.
|
|
| |
|
|
|
